|
When activating Office 365 if we encounter an error “Could not connect to server “0x80072ee7”. We can try using the proxy server and get Office 365 activated. |
||||
|
If it does not work. Perform Following Steps: |
||||
|
step 1–>Control panel—>Network connections—->Local Area Network—(Properties)—>TCP/IP –(properties)—>preferred DNS server address—>4.2.2.2 |
||||
|
step 2–>start—>run as admin—>cmd–>ipconfig /flushdns |
||||
|
Restart the computer and try again. |
Daily Archives: March 2, 2014
word 2013 error “There was an error sending the command to the program.”
|
Resolution: |
||||
|
Open Registry editor by Run Window(Windows + R) |
||||
|
Navigate to the following Reg value. 1. Change the value of Hey classes root \ Word.document.12\ shell \ open \command \ on the right panel – right click and modify the value to |
||||
|
“C:\Program Files\Microsoft Office 15\Root\Office15\WINWORD.EXE” /n “%1” |
||||
|
Navigate to the following Reg value. Hey classes root \ Word.document.12\ shell \ open \command \ 2. Change the value of H Key classes root \ Word.document.12\ shell \ open\ ddexec \ application\ on the right panel – > Right click and modify the value to winword. |
Error: The function you are attempting to run contains macros or content that requires macro language support.
|
|
|
Resolution: 1: |
|
|
|
|
|
To check your macro security settings, click the Microsoft Office Button, click <program name> Options, click Trust Center, and then click Trust Center Settings. |
|
|
|
|
|
If macro security is set to Disables all macros without notification, all macros are automatically disabled. Use the following procedure to enable the macro. |
|
|
|
|
|
1. In the Trust Center dialog box, click Macro Settings, and then click Disable all macros with notification. |
|
|
|
|
|
1. Click OK in the Trust Center dialog box to apply the new setting. Click OK to close the program options dialog box. |
|
|
|
|
|
2. Close the file and the Microsoft Office program that you are using. |
|
|
|
|
|
3. Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run. |
|
|
|
|
|
4. When you have enabled the macro, it is recommended that you return the macro security setting to Disable all macros without notification. |
|
|
|
|
|
If macro security is set to Disable all macros with notification, but you selected Disable when prompted by the macro warning dialog when you opened the file, use the following procedure to enable the macro. |
|
|
|
|
|
1. In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box. |
|
|
|
|
|
1. Close the file and the Microsoft Office program that you are using. |
|
|
|
|
|
2. Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run. |
|
|
|
|
|
If macro security is set to Disable all macros except digitally signed macros, the macro may not have been digitally signed. Verify that you can trust the macro before using the following procedure to allow it to run. |
|
|
|
|
|
1. In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box. |
|
|
|
|
|
2. Close the file and the Microsoft Office program that you are using. |
|
|
|
|
|
3. Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.” |
|
|
|
|
|
Resolution : 2: |
|
|
|
|
|
Actually, this error seems to goes away using the “Add or Remove Features” option from the Add/Remove Programs (or Programs and Features in the newer OSes) control panel applet, going to the bottom of the list of available options (Office Tools) and adding Visual Basic for Applications (VBA) option. |
|
|
How to restore font and other fomatting in a word default templete.
|
|
|
1. Delete NORMAL.DOTM and BUILDINGBLOCKS.DOTX |
|
|
|
|
|
2. Normal.DOTM and BuildingBlocks.DOTX usually reside in C:\Users\<your user name>\AppData\Roaming\Microsoft\Templates |
|
|
|
|
|
3. The default NORMAL.DOTM files used for new profiles are stored C:\Users\Default\AppData\Roaming\Microsoft\Templates |
|
|
|
|
|
4. These files are rebuilt automatically when word is started |
|
|
|
|
|
5. Use regedit to delete HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Word\Data |
|
|
|
|
|
6. This key is rebuilt automatically when word is started |
|
|
office 2010 error “Cannot verify license agreement. Run repair from the control panel.”
|
|
|
If you get this error while launching Office applications in normal mode than stop OfficeSoftwareProtectionPlatform |
|
|
|
|
|
1. services from services.msc |
|
|
|
|
|
2. Remove OfficeSoftwareProtectionPlatform folder from these locations : |
|
|
|
|
|
3. Program files/common files/mirosoft shared |
|
|
|
|
|
4. Program files x86/ common files/mirosoft shared |
|
|
|
|
|
5. Program data/microsoft |
|
|
|
|
|
6. Delete registry key from |
|
|
|
|
|
7. Hklm/software/microsoft /ospp |
|
|
Download link for office 2010 and 2007.
Office 2010 activation Error 0x8007000D.
|
|
|
Download Subinacl from the link below: |
|
|
|
|
|
|
|
|
|
|
|
1. Run and install the Subinacl.msi file into the C drive. |
|
|
|
|
|
(Should be the default install location when you run the file) |
|
|
|
|
|
2. Once you have installed this successfully, right click on the link below and click Save Target As / Save Link As to download it: Office 2010 Activation Fix Batch File. |
|
|
|
|
|
3. Go to the folder where you downloaded the batch file. Right click on the file and click “Run as administrator”. Click Yes or Continue to proceed if prompted. |
|
|
|
|
|
o If using Windows XP then you can run the file normally while logged in as an administrator user. |
|
|
|
|
|
4. Once done, the Command Prompt will say “Press any key to continue”. Do this and the window will close. |
|
|
Cannot save the attachment. Cannot create file: message.wav. Right-click the folder you want to create the file.
|
|
|
1. Click My Computer, and then double-click drive C. |
|
|
|
|
|
2. On the File menu, click New, and then click Folder. |
|
|
|
|
|
3. Name the folder temp0. |
|
|
|
|
|
4. Click Start, click Run, type regedit, and then click OK. |
|
|
|
|
|
5. Locate and then click the following registry key: |
|
|
|
|
|
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security\ |
|
|
|
|
|
6. In the right pane, double-click OutlookSecureTempFolder. |
|
|
|
|
|
7. In the Value Data field, type C:\temp0\ and then click OK. |
|
|
|
|
|
8. Exit Registry Editor. |
|
|
|
|
|
9. Restart the computer. |
|
|
Techie stuff!! 