When activating Office 365 if we encounter an error “Could not connect to server “0x80072ee7”. We can try using the proxy server and get Office 365 activated. |
||||
If it does not work. Perform Following Steps: |
||||
step 1–>Control panel—>Network connections—->Local Area Network—(Properties)—>TCP/IP –(properties)—>preferred DNS server address—>4.2.2.2 |
||||
step 2–>start—>run as admin—>cmd–>ipconfig /flushdns |
||||
Restart the computer and try again. |
word 2013 error “There was an error sending the command to the program.”
Resolution: |
||||
Open Registry editor by Run Window(Windows + R) |
||||
Navigate to the following Reg value. 1. Change the value of Hey classes root \ Word.document.12\ shell \ open \command \ on the right panel – right click and modify the value to |
||||
“C:\Program Files\Microsoft Office 15\Root\Office15\WINWORD.EXE” /n “%1” |
||||
Navigate to the following Reg value. Hey classes root \ Word.document.12\ shell \ open \command \ 2. Change the value of H Key classes root \ Word.document.12\ shell \ open\ ddexec \ application\ on the right panel – > Right click and modify the value to winword. |
Error: The function you are attempting to run contains macros or content that requires macro language support.
|
|
Resolution: 1: |
|
|
|
|
To check your macro security settings, click the Microsoft Office Button, click <program name> Options, click Trust Center, and then click Trust Center Settings. |
|
|
|
|
If macro security is set to Disables all macros without notification, all macros are automatically disabled. Use the following procedure to enable the macro. |
|
|
|
|
1. In the Trust Center dialog box, click Macro Settings, and then click Disable all macros with notification. |
|
|
|
|
1. Click OK in the Trust Center dialog box to apply the new setting. Click OK to close the program options dialog box. |
|
|
|
|
2. Close the file and the Microsoft Office program that you are using. |
|
|
|
|
3. Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run. |
|
|
|
|
4. When you have enabled the macro, it is recommended that you return the macro security setting to Disable all macros without notification. |
|
|
|
|
If macro security is set to Disable all macros with notification, but you selected Disable when prompted by the macro warning dialog when you opened the file, use the following procedure to enable the macro. |
|
|
|
|
1. In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box. |
|
|
|
|
1. Close the file and the Microsoft Office program that you are using. |
|
|
|
|
2. Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run. |
|
|
|
|
If macro security is set to Disable all macros except digitally signed macros, the macro may not have been digitally signed. Verify that you can trust the macro before using the following procedure to allow it to run. |
|
|
|
|
1. In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box. |
|
|
|
|
2. Close the file and the Microsoft Office program that you are using. |
|
|
|
|
3. Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.” |
|
|
|
|
Resolution : 2: |
|
|
|
|
Actually, this error seems to goes away using the “Add or Remove Features” option from the Add/Remove Programs (or Programs and Features in the newer OSes) control panel applet, going to the bottom of the list of available options (Office Tools) and adding Visual Basic for Applications (VBA) option. |
|
|
How to restore font and other fomatting in a word default templete.
|
|
1. Delete NORMAL.DOTM and BUILDINGBLOCKS.DOTX |
|
|
|
|
2. Normal.DOTM and BuildingBlocks.DOTX usually reside in C:\Users\<your user name>\AppData\Roaming\Microsoft\Templates |
|
|
|
|
3. The default NORMAL.DOTM files used for new profiles are stored C:\Users\Default\AppData\Roaming\Microsoft\Templates |
|
|
|
|
4. These files are rebuilt automatically when word is started |
|
|
|
|
5. Use regedit to delete HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Word\Data |
|
|
|
|
6. This key is rebuilt automatically when word is started |
|
|
office 2010 error “Cannot verify license agreement. Run repair from the control panel.”
|
|
If you get this error while launching Office applications in normal mode than stop OfficeSoftwareProtectionPlatform |
|
|
|
|
1. services from services.msc |
|
|
|
|
2. Remove OfficeSoftwareProtectionPlatform folder from these locations : |
|
|
|
|
3. Program files/common files/mirosoft shared |
|
|
|
|
4. Program files x86/ common files/mirosoft shared |
|
|
|
|
5. Program data/microsoft |
|
|
|
|
6. Delete registry key from |
|
|
|
|
7. Hklm/software/microsoft /ospp |
|
|
Download link for office 2010 and 2007.
Office 2010 activation Error 0x8007000D.
|
|
Download Subinacl from the link below: |
|
|
|
|
|
|
|
|
|
1. Run and install the Subinacl.msi file into the C drive. |
|
|
|
|
(Should be the default install location when you run the file) |
|
|
|
|
2. Once you have installed this successfully, right click on the link below and click Save Target As / Save Link As to download it: Office 2010 Activation Fix Batch File. |
|
|
|
|
3. Go to the folder where you downloaded the batch file. Right click on the file and click “Run as administrator”. Click Yes or Continue to proceed if prompted. |
|
|
|
|
o If using Windows XP then you can run the file normally while logged in as an administrator user. |
|
|
|
|
4. Once done, the Command Prompt will say “Press any key to continue”. Do this and the window will close. |
|
|
Cannot save the attachment. Cannot create file: message.wav. Right-click the folder you want to create the file.
|
|
1. Click My Computer, and then double-click drive C. |
|
|
|
|
2. On the File menu, click New, and then click Folder. |
|
|
|
|
3. Name the folder temp0. |
|
|
|
|
4. Click Start, click Run, type regedit, and then click OK. |
|
|
|
|
5. Locate and then click the following registry key: |
|
|
|
|
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security\ |
|
|
|
|
6. In the right pane, double-click OutlookSecureTempFolder. |
|
|
|
|
7. In the Value Data field, type C:\temp0\ and then click OK. |
|
|
|
|
8. Exit Registry Editor. |
|
|
|
|
9. Restart the computer. |
|
|
Changing the default font of Excel 2010 comments on a cell
With the following VBA code, you can change the font size and the font of the comments in cells, but it can’t change the font colors. please use the following VBA as:
1. Click Developer > Visual Basic, a new Microsoft Visual Basic for applications window will be displayed, click Insert > Module, and then copy and paste the following codes in the module:
Sub FormatAllComments()
Dim ws As Worksheet
Dim cmt As Comment
For Each ws In ActiveWorkbook.Worksheets
For Each cmt In ws.Comments
With cmt.Shape.TextFrame.Characters.Font
.Name = “Times New Roman”
.Size = 14
End With
Next cmt
Next ws
End Sub
In the above code, you can set the.Name and.Size variables as you would like.
2. Then click button to run the code. And then click Review > Show all comments to view the comments, all of the comment formats in the whole workbook have been changed. See screenshots:
A handy tool to change all comment formats quickly and time-saving
If you want to quickly change other types of format for all comments, you may try to use the Cell Comment Tools of Kutools for Excel.
Kutools for Excel: with more than 120 handy Excel add-ins, free to try with no limitation in 30 days. Get it Now
After installing Kutools for Excel, please follow the following steps to change the comment formats:
1. Format one comment with the style that you want to apply to other comments.
2. Click Kutools > More > Cell Comment Tools, see screenshot:
3. In the Cell Comment Tools dialog box, click Format tab, and choose the scope that you want to change the comment format, you can choose Active sheet or All sheets. Then click Specify the comment cell button to select the cell which contains the specific comment format you want to apply. See screenshot:
4. Then click Close button to close the dialog box, and the selected cell comment format has been applied to other comments.
Microsoft Office 2013 or Office 365 hangs during setup.
Solution:
There can be many possible reason for office 2013 setup application hangs during installation.
You can try following steps to make it up and running.
Please try to repair office 2013 from control panel and do online repair to complete the installation process.
1.) Open Control panel–>Add Remove Programs–>Microsoft Office -> Repair.
2.) Wait for the installation process and do not open any application.
If setup hangs between 80% and 90%, stop the print spooler service on your PC.
Problems with the print spooler service may cause setup to hang between 80% to 90%.
You can temporarily stop the service, try to install Office again and then restart the service to fix the problem:
1. On a Windows 8 PC, type services.msc from the Start screen and tap or click services in the list of results.
2. On a Windows 7 PC, click Start > Run, type services.msc, and then click OK.
Look through the list of services, find Print Spooler, and open it.
3. Tap or click Stop, and then tap or click OK.
4. Try installing Office again.
5. Once Office is installed on your PC, go back to the list of services and open Print Spooler.
6. Tap or click Start, and then tap or click OK.
If setup hangs right at 94%, restart the PC
If you haven’t already tried restarting the PC, do this if setup hangs right at 94%.